+91-9878923366 
- Shrink ratio 3:1
- Flexible, flame retardant
- Abrasion and chemical resistance
- Reliable physical, chemical and electrical performance
- The heat shrinkable tubing can be pre-cut with dotted lines for tearing off easily.
- Flat tubes offer ease of printing
Technical Data
| Property | Specification Requirement | Test Method | Typical Value |
|---|---|---|---|
| Longitudinal change | ≤10% | ASTM D2671 | ≤5% |
| Tensile strength | ≥10.3MPa | ASTM D2671 | ≥12MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥400% |
| Elongation at break after aging | ≥100% | ASTM D2671 (175˚C/168 hrs) |
≥400% |
| Heat shock | No cracking | ASTM D2671 | No cracking |
| Low temperature flexibility | No cracking | ASTM D2671 (-55˚C/4 hrs) |
No cracking |
| Dielectric voltage withstand | AC2500V/60S No breakdown |
ASTM D2671 | No breakdown |
| Dielectric strength | ≥19.7kV/mm | ASTM D2671 | ≥25kV/mm |
| Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
| Copper corrosion | No corrosion | ASTM D2671 | No corrosion |
| Print performance | Print legible after 20 rubs Print legible after 20 strokes |
SAE AS5942 MIL-STD-202 |
Pass |
| Flammability | VW-1 | UL224 | Pass |
Specifications
| Part Number | Nominal Size | As supplied (mm) | After recovered (mm) | Standard Length (Meter) |
|
|---|---|---|---|---|---|
| mm | inch | I.D.(min) | I.D.(max) | ||
| TMS1353X0024 | 2.4 | 3/32 | 2.4 | 0.8 | 250 |
| TMS1353X0032 | 3.2 | 1/8 | 3.2 | 1.1 | 250 |
| TMS1353X0048 | 4.8 | 3/16 | 4.8 | 1.6 | 250 |
| TMS1353X0064 | 6.4 | 1/4 | 6.4 | 2.1 | 250 |
| TMS1353X0095 | 9.5 | 3/8 | 9.5 | 3.2 | 250 |
| TMS1353X0127 | 12.7 | 1/2 | 12.7 | 4.2 | 250 |
| TMS1353X0191 | 19.1 | 3/4 | 19.1 | 6.3 | 250 |
| TMS1353X0254 | 25.4 | 1 | 25.4 | 8.5 | 250 |
ACE Shrink Tube P-7
DIESEL -RESISTANT, FLEXIBLE, ELASTOMERIC TUBING
DRET is used for insulation, strain relief, and abrasion protection on cable harness and wire bundles in military industries. Especially, provides fluid ad solvent resistance, including lubrication oil, ground-vehicle fuels, and hydraulic fluids.
2. Typical Features
Operating temperature range : -75℃ to 120℃
Flammability : ASTM D 2671 procedure A, C
Minimum shrink temperature : 135℃
Shrink ratio : 50% or more in the radial direction.
3. Standards
MIL-I-23053/16
4. Specification Values
5. Product Dimension
